Endurex™ 515 - EXTERIOR INSULATED IN-FILL PANELS

Endurex™ 515

EXTERIOR INSULATED IN-FILL PANELS

Product Description

The Endurex 500 Series provides energy savings while enhancing the life and the aesthetics of your building exterior.

The Endurex 515 is a standard 1" insulated glazing panel with corrugated plastic stabilizers on both sides of a 2lb EPS foam core. The Endurex 515 is more moisture resistant than the Endurex 525, but provides less impact resistance than the Endurex 505, 525, 535 or 555.

The Endurex 515 is available in a Kynar or Anodized finished aluminum. Endurex 515 panels are manufactured to meet the requirements of a standard 1" insulated glazing panel. Panel thickness is available from as thin as 7/8" to 4" thick.

Resources

Product
Resources

Physical
Characteristics

Features & Benefits

Endurex 515 insulated panels provide energy saving, long lasting beauty for the exterior of your building or store-front.

Endurex™ 500 in-fill storefront panels, provide insulation while enhancing the life and aesthetics of your building´s exterior

Corrugated Stabilizer

Lightweight and moisture resistance are the primary benefits of the corrugated stabilizer. Not the ideal choice if impact resistance and rigidity are key factors.

A 1/2" or 5/8" gypsum stabilizer can be substituted for the corrugated stabilizer on the innerside of the panel, if desired.

Insulation Options

From economical standard 2lb EPS foam to fire retardant PolyIsoCyanurate Foam, the Endurex 515 panel can be configured to provide insulating values to an R-30.

EPS (Expanded PolyStyrene)

Extruded Closed Cell Foam

PolyIsoCyanurate Foam

LEED Credits

Materials and Resources

MR 4.1 and 4.2
MR 5.1 and 5.2

Color/Finish Options

Kynar® (PVDF) - Smooth or Embossed

This resin based paint system (also known as PVDF), protects aluminum and keeps painted metal looking vibrant and like new. It is available in dozens of standard colors. Custom colors also available.

Premium Colors

Anodized - Smooth

A full range of anodized colors are available.

Web colors are never a 100% accurate representation of the actual painted metal. Contact Nudo for aluminum color chips to insure you have the correct color for your project. Call Nudo for a quote on all Premium Colors. Not all colors and finishes are available on composite stabilizer. Call for Kynar colors available in embossed aluminum. Normal lead time for panels with standard Kynar or Anodized colors is 4 weeks. Custom colors also available. Normal lead time for custom colors is 6-8 weeks after color match approval. Nudo reserves the right to utilize PVDF manufacturers of their choice.

Kynar is a registered trademark of Arkema, Inc.

Physical Characteristics