ColumnCorr - Wall Panels
SUPERIOR STRENGTH TO THICKNESS RATIO PANELS
Product Description
ColumnCorr is a co-extruded layered panel, using a polypropylene thermoformed core with an aluminum, FRP or HDPE surface finish on 1 or 2-sides. The panel is specifically designed for applications were strength is desired, but thickness and weight are constraints. ColumnCorr offers excellent strength to thickness ratios and is very easy to install.
Popular Applications
Water and Wastewater Treatment Plants
Marine Facilities
Food Processing Plants
Car Washes
Grow Facilities
Food Trucks
Mobile Units
Click for enlarged view
  • Aluminum, FRP or HDPE surface finish availalbe on 1 or 2 sides
  • Excellent stength to thickness ratios
  • Easy to install
  • Durable
  • Moisture Resistant
  • Rigid
Standard
Sizes

4' x 8'
4' x 10'
Core
Thickness

3mm, 4mm, 5mm, 8mm, 9.5mm
Surface
Thickness

.03, .05, .09, .10
Aluminum and vinyl trims available
Additional surfaces available.
 
All testing was conducted on specimens cut from extruded board. Tensile testing completed using a Type I specimen and 2 in/minute crosshead speed. Flexural Modulus value generated based on a 0.05 in/minute crosshead speed. Compression Strength value generated based on a 2"X2" specimen, a 0.5 in/ minute crosshead speed, and 20% Strain. Corner Crush value generated based on a 6"X6" specimen.